Getting Started; Installation; Bill Selection / Placement - AccuBANKER Silver S2500 Manual De Usuario

3. Getting Started

3.1 Installation

Select an appropriate workstation or space that is clean, flat and leveled. The
equipment should never be placed near strong sources of light, heat sources or air
conditioners. Please do not install the equipment where its weight cannot be
supported. Plug the power cable to the back of the unit and into the wall power
outlet. Turn the equipment on.

3.2 Bill Selection / Placement

To ensure proper operation:
1. Avoid counting wet, excessively dirty, bent or damaged bills
2. Avoid those objects that could be mixed with bills like staples and paper
clips.
$$
3. If counting new bills, fan them lightly since they often stick together.
4. Position the bills in an orderly manner on the hopper tray to ensure an error-
free operation.
$
$$ $$
10
$$