LEGRAND LEXIC Rex2000 D21d Modo De Empleo página 6

3. Setting actual date and summer-/ winter
changeover
Button MENU activates the menu.Select SET TIME... with
button and confirm with button OK .
Select DATE... with button and confirm
with button OK .
Set year with buttons and
OK
confirm with button .
Set day and month with buttons
and confirm with button OK .
Summer-/winter changeover
Summer- / winter changeover can be made manually or auto-
matically if set.
Choose the region of summer-/winter
(see table below) with buttons .
OK
Confirm with button .
If manual changeover is required choose nonE during the date
input. Automatic changeover depends on your country / area.
Choose the appropriate setting for your country / area.
Beginning of End of
Choice summertime summertime
last Sunday last Sunday
Euro
in March in October
last Sunday 4th Sunday
Gb
in March in October
last Sunday
1 ST Sunday
US
in April in October
No No
nonE
changeover changeover
Freely programmable date with regard to the
change from summer time to winter time
Nothern hemisphere
Put in the date at which the summer time starts
and ends at your location/in your country. The
weekday is automatically allocated to the date.
Southern hemisphere
On the southern hemisphere the date at which the
summer time starts/ends must be programmed for
the same year.
Set year with buttons
OK
confirm with button .
Set actual day and month
of summertime with
buttons and confirm with button
Set actual day and month
of real time with buttons
and confirm with button OK .
4. Setting switching times
MENU
Button
Confirm PROG... with button
SET
DATE
Confirm PROG NEW... with button
D/M/Y
SET
DATE
D/M/Y
Set ON time with buttons
confirm with button
SET
DATE
SU/Wi
Advice:
Setting advances in minutes.
Press once = 1 minute
Hold button = higher speed
Set OFF time with buttons
confirm with button
Country /
area
EU
A maximum of 20 ON and OFF times can be set.
GB
Confirmed again with button
only North
America
Terminating program input
Press button
actual time appears.
5. Delete switching times
MENU
Button
Confirm PROG... with button
Confirm PROG NEW... with button
and
To delete program press button
New program can be set now (see §4).
If this day does not contain any program
OK
.
press button
Press button
time appears.
activates the menu.
OK .
OK
.
and
OK
.
and
OK
.
OK
.
MENU
as required until the
18
activates the menu.
OK .
OK .
18
OK .
OK
twice.
18
MENU as required until the actual
18
6. Check switching times
MENU
Button activates the menu. Confirm PROG... with button
ON
Select TIME CHECK... with button
PROG NEW
24 and confirm with button
With button OK check setting times one
18
6
after another.
12
Free storage locations will be
displayed with FrEE.
Terminating check switching times
MENU
Press button as required until the
actual time appears.
PROG NEW OFF
24
18 6
7. Hand ON/OFF
12
Select hand symbol with
button
State of contact set by program
will be reversed.
= ON = OFF
The next program automatically returns the switch to on or off
as programmed.
ON
PROG NEW
24
8. Continuous switching
18 6
12
Select with button
the symbol for continuous
override ON
or continuous override OFF
Terminating continuous switching
Select symbol with button
for automatic operation.
24
6
9. Continuous switch for a preselected number of
days (1 to 99 days)
12
Select the symbol
or for permanent OFF
with the key .
ON
PROG NEW
24
Acknowledge selection with the key
6
Adjust the number of days with
12
the keys .
2 —> days ON/OFF
1 —> day ON/OFF
- - - - —> permanent ON/OFF
99 —> days ON/OFF
98 —> days ON/OFF
The continuous switch is activated imme-
PROG NEW
diately and ends after expiry of the
24
adjusted days at 24:00 hours.
6
The adjusted days are displayed till the
end of the continuous switching.
12
Acknowledge with the key
24
Premature termination of the continuous
6
switch
12
Select the symbol
OK
TIME CHECK ON
OK .
24
18
6
12
24
18 6
12
24
18 6
12
24
18 6
12
24
18 6
12
symbol
for permanent ON
24
18
6
12
OK .
OK .
for automatic operation with the key
.
.