Dual Watch; Menu Settings - TTI TSC-100R Manual De Instrucciones

Note:
If a signal is received, the receiver will remain on the active channel for the dura-
1)
tion of the 'Busy Timer' setting in the Menu setup. If the 'Busy timer' is set to Busy
the receiver will stay on the active channel for as long as the signal is present.
To change the bank while scanning, briefly press BANK/BAND key.
)
To change the scan direction while scanning, rotate the control knob clockwise
3)
or counter clockwise.
n Dual Watch
The Dual Watch function lets you constantly
monitor two channels.
To set the Dual Watch function:
1) Press Func MR to enter the Memory Read
Mode.
) Press Bank/Band to select the preferred
memory bank.
3) Select one of the required channels using
the control knob, and adjust the squelch
level.
4) Press Func DW.
5) Enter the second frequency using the BANK/BAND and Control knob.
6) The Dual watch begins automatically. If a signal is received, the receiver will remain
on the active channel for the duration of the 'Busy Timer' setting in the Menu
setup. If the 'Busy Timer' is set to Busy the receiver will stay on the active channel.
7) To stay on an active frequency indefinitely or to stop the Dual Watch function press
Func DW again. The receiver will exit the Dual Watch function.

MENU SETTINGS

The Menu settings will vary depending on the selected mode.
(VFO Mode or Memory Read Mode)
To access the VFO Mode Menu(default)
1) Press the MENU Key to access the Menu settings.
) Press the volume pq keys to step through the
Menu items.
3) Rotate the Control knob to change the values of
each Menu item.
4) Press the E/VFO key to confirm the change.
16
5
INSTRUCTION MANUAL
3
7
1
2
4
1
TSC-100R/100RBT
3 5
4 7
3
2