Specifications; General; Receiver - TTI TSC-100R Manual De Instrucciones

SPECIFICATIONS

n General
- Frequency coverage: 66-174 MHz
- Number of memory channels : 00 Units
- Frequency resolution : 5, 6.5, 8.33 *,10, 1.5, 15, 0, 5, 30, 50, 100, 500KHz & Auto.
*8.33kHz step works in 108.008
- Operation temperature range : -107C to +607C
- Reference frequency stability : 6 ppm 7C (-107C to +607C)
- Power supply requirement : AAA x 4 Ni-MH or ALKALINE
- Current drain
Stanby (power saved) : 50mA typical
max. audio : 30mA typical
charging(at 9V DC) : 300mA typical
- Antenna connector : SMA (50 )
- Dimensions (proj. not included) : 56(W) x 116.5(H) x 35.8(D)mm
- Weight(w/o Battery) : 160g
*Specifications are subject to change without prior notice or obligation.
n Receiver
- Receive system : Double superheterodyne.
- Intermediate frequencies
1st : 19.65 MHz, nd : 450 KHz
- Sensitivity and squelch sensitivity (except spurious points):
FM (1 kHz/3.5 kHz Dev. 1dB SINAD)
66-87.495MHz
0.5uV
136-174MHz
0.5uV
WFM (1 kHz/5.5 kHz Dev. 1dB SINAD)
87.5-108 MHz : 0.5uV
AM (1 kHz/30% MOD. 10dB SINAD)
108.005-135.995MHz
-0.56uV
- Selectivity
AM/FM : More than 15 kHz/-9dB
WFM : More than 150 kHz/-6dB
- AF output power : 500mW typical at 40% distortion with
- Ext.speaker connector : 3-conductor 3.5(d) mm (1/5") 8
TSC-100R/100RBT
-135.99MHz range only.
3
Less than 150 kHz/-60dB
an 8 load
INSTRUCTION MANUAL 19