Payment Change; P1*/P2 Price Look Up (Plu); Save The Price Look Up (Plu); Error Messages - Gram XF0C Serie Manual Del Operador

Payment change

Press the key and enter the payment amount, the scale will automatically
calculate the charge for customer.
Example: The total price is 15 Euro, press this key and enter 20 Euro, on the
Unit Price window will be displayed 5 Euro as the change for customer

P1*/P2 Price Look Up (PLU)

Press the key to select between PLU group 1 (P01 – P20) and PLU group
2 (P21 – P40).
The display will light up the group selected.

Save the Price Look Up (PLU)

Enter the desired unit price and press the
memories (P01 – P10), the unit price will be saved in the appointed number.
To change save unit price, just repeat the same steps.

ERROR MESSAgES

Err H.
lnitial zero too high (over 10% of max. cap)
Err L.
Initial zero too low (less than 10% of max. cap)
Err N.
Unstable internal value
hhhhhh. Overload, over the max. capacity + 9d
------. Total price exceeded 999999
key, then press one of the 20 PLU
11