Publicidad
Mounting Universal FLIP
With GRIP open, align (1) FLIP Mount and (1) M6 Bolt
3
with front bolt hole.
4
Thread M6 Bolt into
FLIP Mount and tighten
with the included
M5 Allen Wrench.
The GRIP 6 features two forward mounting locations.
Location 1
Location 2
side of the vehicle.
for any standard crossbars.
for narrow crossbars, or a bias toward one
Mounts
TM
28"
23"
Note: M6x18 Washer
is pre-assembled in
this location.
Publicidad
