Publicidad
Snug mounts to crossbar by retightening
12
the Strap Tensioner using the provided
M4 Allen Wrench.
When tightening FLIP straps, check the lever periodically.
Lever should be snug, but not too difficult to articulate.
Once straps have been properly adjusted to the crossbar,
further adjustment should not be necessary to remove or
reinstall the GRIP racks.
Repeat steps 9 - 12 for second GRIP, being sure both
13
GRIP racks are aligned with each other.
Always check that GRIP racks are secure prior to travel.
Securing FLIP
14
After each GRIP has been installed
to the crossbar, secure the
FLIP Mounts using the provided
key and integrated lock on the
side of each mount.
Mounts
TM
Publicidad
