Your Product; Introduction; Package Contents; Cat5E/Cat6 Cable Requirements - Marmitek MegaView 90 Modo De Empleo

3 Your product

3.1

Introduction

Congratulations on your purchase of the Marmitek MegaView 90™! The
MegaView 90™ provides a simple way to extend an HDMI (High Definition
Multimedia Interface) signal or DVI (Digital Visual Interface) over a single
CAT5e/6 Ethernet cable. It even works on your existing home network
(LAN) including routers and switchers. The maximum CAT5e/6 cable length
is 120 metres, at a 1080p resolution. Watch TV programmes, films and
photos stored on, for example, a digital TV decoder, Media Center PC, Blu-
ray player or HDD recorder located elsewhere in your home. Several
receivers may simultaneously be connected to the same network.
All Marmitek products are manufactured with the utmost precision and are
of high quality. Please read this manual carefully and follow the instructions
to enjoy the possibilities of this product optimally.
3.2

Package contents

A. 1x transmitter (HDMI Transmitter)
B. 1x receiver (HDMI Receiver)
C. 2x Power adapter
D. 1x User manual
3.3

Cat5e/cat6 cable requirements

 UTP-, FTP- or STP-cable
24AWG or lower

Solid twisted pair

100 ohm at 1MHz

RJ-45 jack

according to
EIA/TIA T568B
standard
When the set is connected to a home network (LAN), Marmitek
recommends the use of switchers and routers with Gigabit (1000Mbps)
network ports for best performance.
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better
quality). Use a 'solid twisted pair CAT-5e or CAT-6 cable' in order to
optimise transfer quality.
MegaView 90™ 5