Assembly - Chal-tec 10032236 Manual De Usuario

EN
14
Accessory
14 Anti-collision silicone cap
15 Waxing pil
16 Waxing pads
17 Mopping pads

ASSEMBLY

Install the Handle
1 Get the wire of handle through aluminium-alloy pipe (see picture 1).
2 Put the aluminum alloy tube into the bottom of handle.
3 Rotate the aluminum alloy tube until it gets locked in the handle (See picture 2).
Install the main body
1 Connect the terminal of the aluminum alloy tube to the port which is on side of the
main body (see picture1).
2 Put the aluminum alloy tube into the product body.
3 Rotate the aluminum alloy tube until it gets locked (see picture 2).