Chal-tec 10032236 Manual De Usuario página 15

Install battery (no need for new product)
1 Remove the screws and open the cover (see picture 1).
2 Connect the terminals correctly (see picture 2).
3 Recharge the battery monthly to keep good battery performance.
4 Non-original battery may damage the product.
Add water / waxing oil / detergents
1 Push the "PUSH" button to open the plastic cover (See picture 1).
2 Remove the rubber plug and fill the water tank with water or waxing oil or diluted
detergent in appropriate amount. (see picture 2).
• Always keep some water or other suitable liquid in the water tank to avoid water
pump idling.
• Do not mix water with waxing oil.
Charging
1 Full charge the battery before first use.
2 Always use the original charger to charge the battery.
3 Slow flashing LED (about one flashing every second) indicates low battery. Please
charge the battery in time.
EN
15