Publicidad
Idiomas disponibles
Idiomas disponibles
3.0 Product Construction
4.0 Installation Instructions
1. Select the appropriate cable gland to accommodate to enclosure and cable used. Determine the working length needed
inside the enclosure then prepare the cable as shown. Expose the appropriate length of armor, referring to the table value.
See dimension 'L' on Figure 1.
2. Install the cable gland to the enclosure. This could be in a threaded hole (see Figure 2a) or using a locknut (see Figure 2b).
The locknut shall be hand-tightened and then further tightened 1/4 turn with appropriate tools.
3. The armor stop may need to be removed prior to this step, if the conductor bundle does not pass through. Feed the cable
through the cable gland and push until the cable armor hits the armor stop or body. See Figure 3.
4. Tighten the gland nut to the specified torque in the table or until you obtain an appropriate seal. The sealing ring should
seal evenly around the cable's outer jacket. Ensure the cable remains centered as much as possible to obtain an optimal seal.
See Figures 4 and 5.
FIGURE 1
L
FIGURE 3
—
ABB Inc.
Electrification products
Memphis, Tennessee
USA
abb.com
2 of 2
BODY
O-RING
ARMOR STOP
FIGURE 2a
FIGURE 4
—
For service or warranty
assistance, contact
Customer Service
Phone: 800-816-7809
Fax: 800-816-7810
Email: elec_custserv@tnb.com
SPRING
SEALING RING
PRESSURE RING
SLIP RING
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With
regard to purchase orders, the agreed
particulars shall prevail. ABB Inc. does not
accept any responsibility whatsoever for
potential errors or possible lack of
information in this document.
GLAND NUT
FIGURE 2b
FIGURE 5
We reserve all rights in this document and
in the subject matter and illustrations
contained therein. Any reproduction,
disclosure to third parties or utilization of
its contents – in whole or in parts – is
forbidden without prior written consent of
ABB Inc. Copyright© 2018 ABB Inc.
All rights reserved
Publicidad
