ION Acadia Guia Del Usuario página 5

Ocultar thumbs Ver también para Acadia:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Bluetooth Connecting with Acadia
Connecting to one Acadia
1.
Power on the Acadia
automatically enter Bluetooth pairing mode.
2.
Navigate to your device's Bluetooth setup screen, find Acadia, and connect. When
connected, the Bluetooth LED will be lit solid blue and you will hear "Connected".
Note: Do not connect to Acadia_BLE; this is reserved exclusively for connecting to the
ION Sound XP
on your Bluetooth device and try to connect again.
3.
To disconnect, turn off Bluetooth from your device's Bluetooth settings, or press and
hold the Bluetooth button.
Syncing multiple Acadia
1.
Connect to one Acadia
speaker.
2.
Double-press the Bluetooth button on the primary speaker to enter Multi-Sync
Bluetooth LED will change from blue to solid white to indicate it is in Multi-Sync
TM
Note: Acadia
closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync
3.
Power on any other speakers. Press and hold the Bluetooth button on the secondary
speakers to disconnect any currently connected Bluetooth sources.
4.
Double-press the Bluetooth button to enter Multi-Sync
The Bluetooth LED will begin flashing green and the secondary speakers should
automatically sync to the primary speaker.
5.
Once a successful sync is established, the Bluetooth LED on the secondary speaker will be
lit solid green, and you will hear "Synced" from the "secondary" speaker.
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to
the "primary" speaker. See
TM
Tip: Acadia
can sync audio with other Multi-Sync
out more, visit ionaudio.com.
Using the Radio
Selecting a radio station:
1. Press the Radio button to select FM Radio mode.
2. Press either of the Tune/Track buttons to select a radio station. The voice prompts will
indicate the current frequency.
To "seek" (jump to the next available station), hold either button down for a few seconds
until it starts to seek a station.
TM
speaker:
TM
by holding down the Power button for 2 seconds. Acadia
TM
app. If you experience trouble in connecting, select "Forget this Device"
TM
speakers:
TM
speaker using the steps above. This will be the "primary"
speakers should be within 100' (30 m) of each other to properly sync. The
TM
mode, double-press the Bluetooth button again.
Technical Specifications
TM
TM
for Bluetooth and Multi-Sync
TM
-compatible ION Audio speakers. To find
Mode for the secondary speakers.
TM
will
TM
mode. The
TM
mode.
TM
ranges.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido