Kit Assembly - Metra 95-6524B Instrucciones De Instalación

Kit preparation
1. Attach the factory panel clips to
the Metra radio trim panel.
(Figure A)
(Figure A)

Kit Assembly

2. Attach the factory climate control
to the Metra radio trim panel.
(Figure A)
3. Attach factory 12-volt power plug
to the Metra radio trim panel.
(Figure A)
95-6524B
Double DIN radio provision
1. Mount the radio to the double DIN
brackets with screws included with
radio. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
3. Mount assembly into the sub dash.
4. Reassemble dash in reverse order
of disassembly using the Metra
trim panel instead of factory panel.
3
(Figure A)