Beper BT.400 Manual De Instrucciones página 9

Barbacoa electrica
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Electric Barbecue Use instructions
Operation - Mounting
1. Place the water base on the plastic body and fill with approximately 1 litre of water. NEVER exceed this
amount as during the cooking process water may escape and cause scalding.
2. Settle the control panel with heating element into the plastic body ensuring that the cord is in the recess.
3. Fix the grid into the slots of the grid height adjuster
4. Turn the appliance on.
5. The grilling times vary according to the nature of the food and to your personal taste.
6. When grilling has finished, turn the appliance off and disconnect the grill form the mains supply
socket.
WARNING: Water must be filled between the max and min level as indicated on the housing. Too little
water will damage the heating element and too much water will cause boiling water to escape during the
boiling process
Operation - Before use for the first time
Clean the barbecue grill and its accessories.
When the barbecue is first switched on, the grill may emit a new smell. A small amount of smoke may also be
noticeable. We therefore recommend to heat the appliance for approx. 5 minutes without any food. Ensure the
room is well ventilated because of the bad smell of the coating material.
Do not use this appliance for grilling in the meantime.
Cleaning and maintenance
Clean the appliance after each use. Allow the appliane to cool down before cleaning. Always make sure that the
plug has been removed from the mains supply socket after use, before cleaning and storing.
Remove the heating element. Replace the heating element after cleaning. Never switch the heating element on
when it is not placed correctly into the appliance. Never immerse the heating element in water or liquids. Clean
the heating ele¬ment with a clean dry cloth only. Clean the grill rack and the tray with
warm soapy water and dry afterwards
WARNING: Do not use harsh abrasive cleaners or a metal sponge to clean the tray.
Never immerse the appliance, cord or plug into water or other liquids.
Technical details
Power consumption: 2000W
Mains Voltage: 230V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
9
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido