Huawei B525 LTE CPE Guía Rápida página 8

6
FAQs
How do I restore factory settings?
When the router is turned on, press the reset button for approximately 3 seconds using a
pointed object until the
settings to the default. You can reconfigure them after the router is restored.
What should I do if I forgot the Wi-Fi password or the user name and login password
for the Web UI management page?
Restore the router to its factory settings and then use the default Wi-Fi password, user name
and login password to try again.
What should I do if the indicator
established?
Check if the micro-SIM card is inserted. Refer to the Setup section for the right size of SIM
1.
card and the right way to insert it into the slot.
If the issue persists, restore the router to factory settings and try again.
2.
Contact your carrier to check if your SIM card is out of service. If it's a new card, check if it
3.
has been activated.
What should I do if the Internet speed is slow?
Check the signal indicator
1.
around or move it close to a window to improve signal reception.
If your device is connected to the router over Wi-Fi, move your device around to receive
2.
better signal.
Switch to Wi-Fi 5 GHz if it is supported by your device.
3.
Restart the router and your device, and try again.
4.
Check if you have reached your data traffic limit for the month. If so, your carrier may limit
5.
your Internet speed.
How can I connect to the router using Wi-Fi Protected Setup (WPS)?
Ensure that Wi-Fi is enabled on the client.
1.
Press and hold the WPS button on the router for two to five seconds to set up a 2.4 GHz
2.
WPS connection, or press and hold the WPS button on the router for more than five
seconds to set up a 5 GHz WPS connection.
Why can't I access the router's web-based management page?
Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
1.
Ensure that your computer is set to obtain an IP address and DNS server address
2.
automatically.
Restart your browser, or try using another browser.
3.
If the problem persists, restore the router to its factory settings.
4.
Why is the content displayed on the Web UI management page not up to date?
Depending on your browser's cache, the content for your device on the Web UI management
page may not be up to date. Manually clear your browser's cache (for example, open your
browser and choose Internet Options > General > Browsing history > Delete.) and re-
launch the Web UI management page.
If you are experiencing any issues with the router:
Restart the router.
1.
Restore the router to its factory settings.
2.
Refer to the help section on the web-based management page.
3.
Contact your network service provider.
4.
indicator starts to blink. Restoring factory settings will restore the
is red or an Internet connection cannot be
on the router. If it shows weak signal, turn the router
6