Digital Radio (Dab) - Kenwood KDC-DAB43U Guia De Inicio Rapido

Digital Radio (DAB)

Volume knob
Preparations
Press and hold [DAB] to start Service
List update.
"LIST UPDATE" appears and update
starts. "UPDATED" appears when update
completes.
Press and hold [DAB] to cancel
Service List update.
Search for a service
1
Press [DAB] to enter DAB source.
2
Press [ 1 ] repeatedly to select a
band (DB1, DB2, DB3).
3
Press and hold [E] / [F] to search
for an ensemble.
4
Press [E] / [F] to select an
ensemble, service or component to
listen.
– The tuning mode can be changed. Refer
to <SEEK MODE> (page 5).
Service Preset Memory
Press and hold [1] to [6] to memorize
the current service.
Recall the service in the memory
Press [1] to [6] to recall memorized
service.
Selecting a service
1
Press [DAB] to enter Service Search
mode.
2
Turn the volume knob to select a
service, then press the knob.
– To skip a character at a time, press [E]
/ [F].
– Turning the volume knob fast in the
Service Search mode allows you to
enter the alphabet search mode.
– "NO LIST" appears when no Service List
is obtained.
To cancel the Service Search mode
Press [ 6 ].
Alphabet Search for service
1
Press [DAB] to enter Service Search
mode.
2
Press [ 1 ] to enter Alphabet Search
mode.
"< ABCDEFGHIJK >" appears.
3
Turn the volume knob to select the
character to be searched for.
– Press [E] / [F] to scroll up or down
by a page.
4
Press the volume knob to start
searching.
After this step, see step 2 of <Selecting a
service> (page 5) to select a service.
To cancel the Alphabet search mode
Press [ 1 ].
To cancel the Service Search mode
Press [ 6 ].
Changing the digital radio settings
1
Press the volume knob to enter
Function mode.
2
Turn the volume knob to select
SETTINGS , then press the knob.
3
Turn the volume knob to select a
desired setting item, then press the
knob.
See table below for selection.
4
Press and hold [ ] to exit.
Item Selectable setting (Preset: *)
SEEK
Press E/ F
Press and hold
MODE
E/ F
AUTO1 * Select an
Automatically
ensemble, service searches for an
or component. ensemble.
AUTO2 Search in the order
of the services in —
the preset memory.
MANUAL Select an
Manually search
ensemble, service for an ensemble.
or component.
TI ON *: Temporarily switches to Traffic
Information. ;
OFF: Does not switch to Traffic information
• For details, see the Instruction Manual.
English | 5