Celestron HomeCast LITE Manual Del Usuario página 6

setting up multiple sensors
If you have additional sensors you can set them up at this time. Your Personal Weather
Station works with up to three sensors. Use the Channel Selecting Switch (D4) to set the
additional sensors to Channels 2 or 3. Verify the signal is being acquired by the Weather
Station as before. On the Weather Station, check that the temperature readings have
been acquired by pressing the Channel Button (B3).
set the Clock/Calendar Features
Hold the Mode/Set button (B7) for 3 seconds to enter the Clock/Calendar settings mode.
The clock readout will appear with the hour digit blinking. Press buttons B5 and B6 to
adjust time. Press button B7 to accept the change. The minutes will blink. Set the minutes
the same way. Follow the same steps to set the Year. The Month and Day will be displayed
now. To switch between M/D and D/M display mode press the B5 or B6 button. After
selecting, you will be prompted to change the day and month number. TZ will now be
displayed. TZ represents Time Zone. This is a unique feature which allows you to see the
time in different time zones.
NOTE: You will have to return to this spot and set the TZ to 0 to return to your current time.
Next set the language the day of the week will be displayed in. See chart on page 7 to
reference codes for each language.
NOTE: The Clock/Calendar setting mode will automatically exit after 5 seconds if there is no activity.
6