PNI HUNTING 2C Manual De Usuario página 9

Timer
Time lapse
Delay
Stamp
SD Cycle
Recording
9
a. Set up
1. Press to enter configuration page, press
ON; press again
2. Press to choose the desired number, press
go to the next number
3. Press again
b. How does it work?
The camera will only work within the set time frame
a. Set up
1. Press to enter configuration page, press
ON; press again
2. Press to choose the desired number, press
go to the next number
3. Press again
b. How does it work?
The camera will take pictures or record periodically at preset times
a. Set up
1. Press to enter configuration page, press
ON; press again
2. Press to choose the desired number, press
go to the next number
3. Press again
b. How does it work?
The camera will take pictures or start recording after the set time
from motion detection
a. Set up
1. Press to enter configuration page, press
OFF; press again
b. How does it work?
Battery level, phase of the month, temperature, date/time and
camera ID will be printed on the photo
a. Set up
1. Press to enter configuration page, press
OFF; press again
b. How does it work?
If you select "ON", the camera will continue to record photos or
videos by deleting older recordings from the SD card.
to set the timer
to exit.
to set the time lapse
to exit.
to set the desired delay
to exit.
to confirm the setting
to confirm the setting
and choose
to save and
and choose
to save and
and choose
to save and
to choose ON/
to choose ON/
User manual