Helpful Tips; Cleaning & Maintenance - Nostalgia Old Fashioned CARNIVAL SNOW CONE Instrucciones Y Recetas

1. HELPFUL TIPS

Ice
For optimal ice shaving results, ice cubes should sit out of the freezer, in a bowl, for about
10 minutes before putting them into the shaving unit. If ice is frosty in appearance, it
is too hard to shave. When ice is clear and wet to the touch, then it is ready to shave.
CLEANING & MAINTENANCE
1. Make sure appliance is turned off and unplugged before cleaning.
2. Open the housing door to clean and dry the inside of the unit
using a slightly damp, non-abrasive cloth or sponge.
3. Wipe the outside of the unit using a slightly damp, non-abrasive
cloth or sponge, then dry with a non-abrasive towel.
4. The shaving unit and clear lid are dishwasher safe. To take
out the shaving unit, refer to steps on page 11.
Replacing the Blade
When your SNOW CONE CART blade becomes dull after a long period of normal
use, replace it with the included Replacement Blade and Tool. Should you need
additional blades, you can order them directly from the manufacturer.
Blade Housing
Blade (M)
The blade is VERY sharp. Use EXTREME CAUTION when handling.
11
Blade Cap
Spinner