Assembly B70H - LUTZ B70H Manual De Instrucciones

en
!
WARNING
Danger of injury at the openings of the pump - limbs can be
pulled in!
► Do not grip into the openings of the pump when the power
supply is connected (→Fig. 4).
► In case of malfunction or incomprehensible downtime, always
disconnect the pump from the power supply.
!
WARNING
Persons can fall over the pump, hose line, grounding cable or
wiring!
► Position the pump and the accessories visibly for all persons or
cordon off a sufficient area around the pump.

5.1 Assembly B70H

3 Motor is switched off
3 A shut-off device is available on the container
!
WARNING
Risk of injury by crushing!
► When mounting the motor on the pump tube, hold the motor
in such a way that no limbs can be squeezed between the motor
and the pump tube.
The drive motor is connected to the pump via/using four screws. Use
the bores in the flange (→ Fig. 5).
► Before assembly the jaw-type coupling must be adjusted at
motor and pump side (→ Fig. 6 - Item 1).
► Mounting pump tube on the motor (→ Fig. 6, item 2).
Fig. 4
Fig. 5
Fig. 6
15