Safety Instructions - lbx S850 Manual Del Usuario

1. Safety Instructions

-This sterilizer is designed for laboratory usage only.
-The instrument shall not be modified or altered in any way. Any modification or alteration will void the warranty, void
the regulatory certifications and create a potential safety hazard.
-It is strongly recommended that the instrument should work for no more than three hours in the highest temperature (850-
930℃).
-We are not responsible for any injury or damage caused by using the instrument for any non-intended purpose, or
modifying the instrument by any person who is not authorized.
Warning!
•
Read the operating instructions carefully
before use.
•
Ensure that only trained staff works with the
instrument.
•
Do not operate the unit near flammable
liquids or dangerous materials.
•
The sterilizer is not intended for use with
scalpels, forceps or any sharp objects. The
use of such objects can cause element
malfunction.
•
Note that the heat shield or end caps
remains hot even after the sterilizer is
turned off, ensure to avoid any contact with
these parts.
•
Allow sufficient time for the heat element to
cool down prior to cleaning, service or
transport and check the unit is turned off.
•
The sterilizing time for the articles like
inoculation loops/ needles should not be
too long; otherwise the lifespan of the
sterilizing articles will be shortened
because of the high temperature of the
handles.
•
Connect the device to an earthed power
supply to ensure the safety of the machine
and the experiment; connect the power as
the machine requires it.
Table 1
3