Warning – Batteries
• Only use batteries (or rechargeable batteries) that match the specified type.
• Before you insert the batteries, clean the battery contacts and the polar contacts.
• Do not allow children to change batteries without supervision.
• Do not mix old and new batteries or batteries of a different type or make.
• Remove the batteries from products that are not being used for an extended
period (unless these are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter the environment.
They can contain toxic, environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries from the product.
• Avoid storing, charging or using batteries in extreme temperatures.
4. Getting Started
4.1. Inserting the batteries
• Pull the battery compartment out by the notch. Remove the contact breaker
• Gently push the battery compartment back into the housing until it clicks into place.
4.2. Replacing the batteries
• Pull the battery compartment out by the notch.
• Remove the spent battery and insert a new CR2025 button cell, observing polarity.
• Gently push the battery compartment back into the housing until it clicks into place.
5. Installation
• You can either stand the thermometer/hygrometer on an even surface using the
fold-out stand on the back of the device, or attach it to a wall using the opening on
the back of the device.
• Install an anchor, screw, nail, etc. in the wall of your choice.
Hang up the thermometer/hygrometer by the notch.
3