Veridian Healthcare Sterling Serie Manual De Instrucciones página 7

FLOOR STAND ASSEMBLY INSTRUCTIONS
7. Using the two (2) 3/8" screws with washers, attach the
black wire basket to the upper pole with the phillips-
head screwdriver, Fig 7.
NOTE: To prevent tipping, align the front of the basket
with the caution warning label on the lower pole
8. Attach the oor stand mount bracket to the top of the
stand assembly using the two (2) 1/2" screws and the
phillips-head screwdriver, Fig 8.
9. Carefully slide the clock xture onto the bracket, Fig 9.
Take care to properly align the brackets as the clock is
not further secured with screws or other hardware.
10. Adjust the stand to the desired height using the height
adjustment knob. The stand can be adjusted from
45"–55". Never adjust the xture higher than 55" to
prevent tipping or damage to the unit.
Fig. 7
Fig. 8
Fig. 9
E E N N G G L L I I S S H H • • 7 7