Using The Vacuum - Shark Navigator UV400 26 Manual Del Usario

Using the Vacuum

OFF
1
Your Shark Navigator Upright
® ™
Vacuum is a versatile tool that
can be used to clean bare floor
surfaces or carpets – with the click
of a switch.
Stand the vacuum into the upright
position.
Plug in the vacuum.
1 S tart with the Power Switch in
the "O Off" position.
2 P lace your foot on the Floor
Power Nozzle and pull handle
towards you.
3 S et the Power Switch to desired
cleaning setting.
6 TOLL FREE: 1-800-798-7398
UV400_26_IB_ENG_SPA_110111.indd 6
Bare Floors / Tools
4
Carpets
Indicator Light
4 When cleaning bare floors:
S elect the "I On" position for
suction only cleaning to avoid
scattering dirt while cleaning.
When cleaning carpets:
E nsure you have pulled the
handle towards you and select
the "II Brush Roll On" position
to agitate the carpet fibers for
deeper cleaning performance.
I MPORTANT:
To protect your carpets, the
Brush Roll will only turn on when
you have pulled the handle back
towards you and released the
Floor Power Nozzle.
I MPORTANT:
Your Brush Roll Indicator Light
will illuminate solid green when
brush roll is on, or solid red if
there is a blockage. This feature
is designed to protect your
Lifetime Belt that powers your
Brush Roll. See Checking for
Blockages on page 11.
N OTE: The height of your power
nozzle has been optimized for
easy pushing and superior clean-
ing on all floor types, so there
is no need to make any height
adjustments as you transition to
different floor & carpet types.
11-01-11 1:45 PM