Step 24
Push the RUBBER SLEEVES (MM) over the METAL PINS (NN). Insert the METAL PINS into the hole locations of your
å
choice in the LEFT END (B) and LEFT UPRIGHT (D). Set the ADJUSTABLE SHELF (L) onto the METAL PINS.
Push a CAM COVER (VV) onto each HIDDEN CAM.
å
To insert the drawers into your unit, tip the front of the drawers down and drop the rollers on the drawers behind
å
the rollers on the unit. Lift the front of the drawers up and slide them into the unit. Repeat this step to insert the
KEYBOARD SHELF (O).
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
25 lbs.
L
NN
(4 used)
www.sauder.com/services
B
D
40 lbs.
MM
VV
To cover HIDDEN CAMS
(10 used)
70 lbs.
15 lbs.
20 lbs.
408558
25 lbs.
O
To adjust the drawers, loosen the fi rst screw
in the SLIDE, move the drawer up or down
as needed, and then tighten the screw.
Page 29