KN95/FFP2 Particulate Respirator, Exhalation Valve:
Operating instruction:
Product description:KN95/FFP2 Particulate Respirator, Exhalation Valve
Product type:HF0801
Materials: Outer punched nonwoven materials, which are non-toxic, odorless, non-allergenic, non-irritating and have good porosity
Storage conditions: The mask shall be stored in a clean environment to prevent it from damage, fouling, dust, direct sunlight, high
temperature and harmful chemical contamination, etc. Meanwhile the mask must be stored in a proper way to avoid deformation
Period of use: It is generally recommended to discard it after use every day to avoid secondary pollution; it can be stored for three years
under sealed conditions
Product standard: GB 2626-2006 & EN149:2001 FFP2
Filter classification: KN type anti-cost particulate matter &FFP2 anti-oil particulate matter
Reagent for checking filtration efficiency: Sodium chloride granules &OIL paraffin OIL granules
Filtration efficiency: ≥95.0%
Notes:
1 ) Not for use in an oxygen-deficient environment with an oxygen content below 18%.
2) Not for use in an environment that immediately endangers life and health.
3) Can not be disinfected with a microwave oven.
4) Improper use of this product can lead to illness or even death.
5) This product shall not be used when there are hair, beard or others on the face that directly affect the airtightness between the
face and the edges of the mask. To maintain good airtightness between the face and the edges of the mask, the hair, headscarf or
other devices must be removed from the seal edges of the mask and the face during use.
Refer to the information provided by the manufacturer - Storage conditions: temperature: -10-60° C; humidity: 15-90%
Wearing instructions:
1 ) Before wearing a new mask, stretch the elastic headbands with hands in an interval of 24 cm.
2) Place the mask in the palm so that the metal nose clip directs towards the fingertips with the headbands hanging naturally.
HF0801
中文
EN
DE
RU
KO
PT
JA
ES
5