VWR 444-7084 Manual De Instrucciones página 5

F.
E.
J.
D.
C P
ONTROL ANEL
The front panel of the Incubating Orbital Shaker contains all the controls
and displays needed to operate the unit.
A. Standby button/standby indicator light: The standby indicator light
will illuminate when the unit is plugged in. The unit will be in standby
mode. Press the standby button to activate the temperature, speed and
time functions. The standby indicator light will shut off and the temperature,
speed and time displays will illuminate. Press the standby button again
and the unit will once again be in standby mode.
B. Temperature display: Displays the actual/set-point temperatures in
conjunction with the actual/set-point indicator lights. C. Up/down
arrows for set-point control. On/off button starts/stops the heating
function. D. The heat indicator light will be illuminated when the unit is
heating.
E. Actual indicator light: Illuminates when the temperature displayed is
the actual temperature of the air in the chamber.
G. B. H. K.
C. I. L.
F. Set-point indicator light: Illuminates when the set-point temperature
is displayed.
G. Caution hot indicator light: Illuminates when the air temperature of
the chamber is above 40°C (104°F).
H. Speed display: Displays the speed of the shaker. I. Up/down arrows
for set-point control. On/off button starts/stops shaking function. J. The
speed indicator light will be illuminated when the unit is shaking.
K. Time display: Displays accumulated time (continuous mode) or how
much time is remaining (timed mode). The display range is from 0 to
9,999 minutes in one (1) second increments. The display will indicate
minutes and seconds until the timer reaches 99 minutes and 59 seconds
(99:59), then the display will automatically display minutes up to 9,999.
L. Up/down arrows for set-point control. On/off button starts/stops the
time function.
A.
4