Scope Of Delivery; Electrical Installation - AL-KO AMS2 Mammut Tandem Instrucciones De Montaje

en

Scope of delivery

Fig. 3: Scope of supply electrical installation tandem
1 1x fuse holder
2 1x release line
3 1x RADIO CAN ADAPTER (F-C-A)
4 4x fuses
5 4x contact lock
We recommend having all installation work carried out only by competent specialist workshops or
our AL-KO Service Centres.
Carry out electrical installations according to the applicable guidelines!
Installation

Electrical Installation

1. Select a suitable installation location for the battery (not supplied) of the Mammut power supply.
2. Make a sufficiently large opening in the caravan floor for the cables to the battery.
Make sure that there are no installations and/or weight-bearing parts in the area where you make
the opening!
3. Guide the positive and negative cables as well as the data cable for the drives through this opening
into the inside of the caravan.
4. Install the release sensor on the drawbar.
8
9
10 mm
3
4
1
5
6 2x fuse holding plate
7 1x battery terminal
8 1x protective tube
9 Tools (not included in the scope of delivery)
2
6 7 8
1652674_c