Desa CTR25NR Manual Del Usuario página 14

OPERATING HEATER
Continued
14
1. Slide selector switch on remote receiver to
the REMOTE position.
2. Slightly pull and turn auxiliary knob so the
AUX is to the left and right and ON is to the
top and bottom positions.
3. Light the pilot. Follow steps 1 through 6
under Lighting Instructions, page 13.
DISPLAY
The LCD display on the remote control indi-
cates current room temperature in Fahrenheit
or Celsius. The small flame indicates burner/
valve in operation. ROOM indicates remote
is in thermo operation. TEMP appears during
manual operation. SET appears during the
time of setting the desired temperature in the
thermo operation.
Changes heater
from Manual
Mode to
Thermo Mode
Sets
temperature in
Thermo Mode
www.desatech.com
HAND-HELD REMOTE
CONTROL OPERATION
ROOM SET TEMP
ON
OFF
MODE
SET
F
Turns
heater
ON
Turns
heater
OFF
113261-01A