Küchenprofi VISTA2 PLUS Manual Del Usuario página 11

17. Pull out the power plug after each use and in case of:
– Malfunctions during operation
– Cleaning
Please do not pull on the power cord, but on the plug itself!
18. Check the power cord and connecting cord before every use for
damage. void smashing or kinking the cords, touching hot surfaces
or abrasion on sharp edges. If the cords are damaged, they must
definitely be replaced. Use only original parts.
19. Never submerge the device, the cords, or the plug in water or other
liquids. Please do not clean it in the dishwasher.
20. Never use the device if you discover damage, if water has entered
the housing, or if the device has fallen.
21. Never attempt to open or repair the device yourself. In case of
malfunction, please only have it repaired by qualified experts! Con-
tact an authorized retailer for this.
Before using for the first time
· Please first read these operating instructions and the safety instructions
carefully.
· Remove all packing material first and dispose of it properly.
· Wipe the housing with a moist cloth and dry thoroughly.
· Clean the grill top with warm water only, some dishwashing detergent
and a solid sponge. Do not use any abrasive cleansers or sponges.
· You can clean the pans and the spatulas with hot water and some mild
dishwashing detergent. Please thoroughly dry all parts.
· Place the grill top on the device with the corrugated surface facing
upwards. Ensure that it lies safely on the support.
· Heat the empty device for approx. 10 minutes; the slight smoke and
odor that will probably be produced is completely harmless. This is only
protective oil, which was applied during production. Ensure good
ventilation of the room during this period!
Use
· Use a washable, heat resistant surface because of the possible risk of
spattering.
· Caution: Please ensure that the power cable, the connecting cord and
pans do not touch the heating coils!
· Place the grill top with the corrugated surface facing upwards on the
device.
· Insert the power cord into the device and connect up to 3 further devi-
ces with the according connecting cord.
· Insert the plug into the power outlet.
· Switch on the devices and allow them to preheat for approx. 8 – 10
minutes.
· Slightly grease the grill tops (the pans as well if needed) with oil, butter
or similar.
· You can now fry the prepared pieces of meat, fish or vegetables on the
grill top.
· Place the desired ingredients in the pans and place these on the rack
beneath the heating rod.
· s soon as the ingredients are done, remove the pans. In order to avoid
scratches on the finish, empty the pans with the included heat-resistant
plastic spatulas only.
· Caution: The pans are hot. For this reason, touch them by the heat
resistant handles only and also place them on heat resistant coasters.
· We recommend that you do not leave the devices on for an extended
D G B
11