Obtaining Service, Assistance, And Parts; Repair Service; Technical Assistance; Mounting Accessories And Replacement Parts - Federal Signal AV1-LED Manual De Instalación Y Mantenimiento

4. Grasp the group of three AV1-LED stick PCBAs and pull them
straight up from the power PCBA.
5. Remove and replace the AV1-LED stick PCBAs on the retaining
bracket.
6. Insert the bracket with the stick PCBAs onto the pins on the power
PCBA. Secure the assembly with the Phillips-head screw.
7. Align the pins on the housing with the detents on the lens. Apply
downward pressure on the lens while turning it clockwise one-
quarter turn.
8. Tighten the lens locking screw.
9. Restore power and test the Model AV1-LED for proper operation.

Obtaining Service, Assistance, and Parts

Federal Signal will service your product and provide technical
assistance and support. Please call the phone numbers listed below. For
instruction manuals and information about related products, please go
to http://www.federalsignal-indust.com

Repair Service

Products returned for repair require a Return Authorization form.
To obtain service for the product, please contact the Federal Signal
Service Department at 708-534-4858.

Technical Assistance

For technical assistance, please call Technical Support at
708-534-3424, extension 5823.

Mounting Accessories and Replacement Parts

To order replacement parts, please call Federal Signal Customer
Support at 708-534-4756.
For mounting accessories and replacement parts, see Table 1 and
Table 2 on page 18.
Installation and Maintenance Manual
Model AV1-LED Lights
■
17