Warnings And Cautions; Introduction - Leviton LEO LEDFS-STD Guia Del Usuario

WARNINGS AND CAUTIONS

• This product contains no user-serviceable parts. DO NOT open the housing or attempt any repairs, doing so will void
your manufactures warranty. In the unlikely event your unit may require service please contact Leviton Technical support.
• Always open the tripod wide enough and lock the legs and columns tightly before installing the LEDFS Follow Spot.
• Always install the tripod on a flat and solid surface.
• DO NOT install and operate this product on an inclined plane, floor or platform.
• DO NOT install oversized follow spots on this tripod.
• DO NOT operate this product if you see damage on the columns, spigots, legs or locks.
• This product is for indoor use only! DO NOT expose this product to rain or moisture to prevent from rusting.
• DO NOT overload the tripod.

INTRODUCTION

LEO™ Follow Spot tripod is a heavy duty tripod designed for the LEO™ LED Follow Spot. The tripod provides a very stable
and firm stand for the Follow Spot to operate freely and safely. The tripod height can be easily adjusted from 37 inches to 60
inches and fixed in any position. The tripod has a detachable Follow Spot Spigot for connection to the LED Follow Spot. It
also provides a 5/8" diameter Side Spigot for a smaller fixture.
Hex Lock Nut
Follow Spot Spigot
(detachable)
Follow Spot Spigot Lock
Main Column Upper Lock
Main Column Saddle
Extendable Leg Lock
Extendable Leg
Plastic Foot
Leg Braces
CONTENTS
• Tripod
• Follow Spot Spigot
• Hex Lock Nut
Optional: Lockable wheels (sold separately)
Follow Spot
Spigot Hole
Side Spigot
Tripod Head
Upper Column
Main Column
Main Column
Middle Lock
Leg
Main Column Lower Lock
1
Follow Spot Spigot
M12mm Stud
1"
4-5/16"
1-1/8" Dia. Rod
Side Spigot
5/8" Dia.
Follow Spot
Spigot Hole
2.5" Max.
1-3/16"
Height
Lock
Side
Spigot
Lock
Loosen
Upper
Column
Slot Hole
for Carrying