Extendable Leg; Height Adjustment - Leviton LEO LEDFS-STD Guia Del Usuario

EXTENDABLE LEG

The tripod features an extendable leg to allow it to stand on an uneven floor such as a platform or step (max. 6" high).
• Loosen the extendable leg lock to extend the leg.
• Tighten the lock after extension.
NOTE: Ensure the main column is kept vertical to the ground to keep the tripod in good balance. Open the tripod legs as
wide as possible. DO NOT use wheels on uneven surfaces.
Maximum
Extended Length 6"
Extendable
Leg Lock
Platform Height
Not To Exceed 6"

HEIGHT ADJUSTMENT

NOTE: The tripod height can be adjusted from a minimum of 37 inches to a maximum of 60 inches.
EXTEND THE TRIPOD
• Loosen main column upper lock.
• Pull the upper column up to the
desired position.
• Tighten the main column
upper lock.
Upper Column
Main Column
Upper Lock
90°
* Always Keep
Main Column
Vertical to Ground
LOWER THE TRIPOD
• Loosen the main column middle and lower locks.
• Lower the main column to the desired position.
NOTE: Maintain 1" min. space between main column and floor.
• Fasten the main column middle and lower locks.
Extend
Upward
Main Column
6
Extend
Downward
Main Column
Main Column
Middle Lock
Main Column
Lower Lock
Keep Main Column 1"
Minimum Off Floor