LEXIBOOK BT1000 Serie Manual Del Usario página 24

CONNECTING AN EXTERNAL DEVICE USING AUX IN
1. Connect an AUX out cable to the AUX IN jacks at the back
of the tower.
2. Supply the tower with power. The standby indicator turns
on.
3. Press the POWER button to turn the tower on and press
the SOURCE button repeatedly to select AUX mode.
4. Turn on the connected external player and start playback.
5. Press the volume buttons to adjust the volume level.
6. Press the TREBLE buttons on the remote control to adjust
treble levels as desired.
7. Press the BASS buttons on the remote control to adjust
bass levels as desired.
8. Press the equalisation pre-set mode buttons MUSIC,
MOVIE or VOICE to turn on the pre-set equalisation effect
as desired.
9. Press the MUTE button to turn off the sound. Press again to resume.
10. When you are done listening, press the POWER button to turn off (standby
mode) the tower.
CONNECTING AN EXTERNAL DEVICE USING LINE IN
1. Connect one end of the LINE IN cable to the headphone
jack of your external device.
2. Connect the other end of the cable to the LINE IN jack at
the back of the tower.
3. Connect the tower to the power source. The standby
indicator turns on.
4. Press the POWER button to turn the tower on and press
the SOURCE button repeatedly to select LINE IN mode (L
In).
5. Turn on the connected external player and start playback.
6. Press the volume buttons to adjust the volume level.
7. Press the TREBLE buttons on the remote control to adjust
treble levels as desired.
8. Press the BASS buttons on the remote control to adjust bass levels as
desired.
9. Press the equalisation preset mode buttons MUSIC, MOVIE or VOICE to turn
on the preset equalisation effect as desired.
10. Press the MUTE button to turn off the sound, press again to resume.
11. When you are done listening, press the POWER button to turn off (standby
mode) the tower.
24
BT1000seriesIM1274_18Jun_V25.indd 24 19/06/2014 2:55 PM