First Things First - Polk Audio PSWi225 Manual Del Propietário

FIRST THINGS FIRST

Caution: Subwoofers are heavy. Exercise caution when unpacking your subwoofer.
Please check to ensure you have everything in your Polk Audio
PSWi225 Wireless Subwoofer carton. Inside, you should find:
Take Inventory
• PSWi225 Wireless Subwoofer
• Transmitter
• 5' RCA Cable
• Power Supply For Transmitter
• Owners Manual
• Transmitter Wall Mount Template
• Online Registration Card
If anything is missing or damaged, or if your Polk Audio
PSWi225 fails to operate, please notify your dealer immediately.
We recommend keeping your original carton and packing
materials in case you need to ship the unit in the future.
WHERE TO LOCATE YOUR WIRELESS
SUBWOOFER FOR THE BEST SOUND
The PSWi225 Wireless subwoofer can be placed anywhere in the room, up to 30'
(10 meters) from its transmitter. Your Wireless Subwoofer is really easy to place
and can go just about anywhere in the room. Plus you don't have to worry about
connecting wires, because the only wire you have to plug in is the power cord
to an AC outlet and the transmitter wires to your receiver or pre-amp.
Note: Placing your subwoofer in a corner of your room will reinforce
the subwoofer's output, making it sound louder.
We do recommend placing your subwoofer in different locations
within your room to learn what produces the best sound quality
based upon your listening preferences.
Specifications
Dimensions 12 1/2" W x 12 1/2" D x 13" H
(31.75cm x 31.75cm x 33.02cm)
System Power 100 Watts
Subwoofer Weight 21 lbs (9.53kg)
For more information on subwoofer placement, go to:
www.polkaudio.com/education/article.php?id=20.
Customer Service Hours of Operation: Monday-Friday, 9
HOW TO CONNECT YOUR WIRELESS SUBWOOFER
Wireless ID Switches—The Wireless ID Switches, found on both the
subwoofer and the transmitter, select the channel for the wireless signal.
The switch settings change the frequency of the wireless signal the transmitter
sends to the Wireless Subwoofer. The Switch provides four possible settings
in the event there is interference from other devices in your home. The two
switches must be set to the same position for the subwoofer to receive
a signal.
Transmitter Inputs
2 3
1
Audio Inputs—Where you connect your transmitter to your receiver.
1
Use the 5' analog L/R or LFE audio cable provided.
2 Wireless ID Switch—Selects the "channel" for the Wireless
Subwoofer signal. Don't forget to select the same "channel"
on the Wireless Subwoofer itself.
3
Power Connection—The transmitter power supply is connected here.
LED—Indicates transmitter is active.
4
Wireless Subwoofer Controls
6
2
4
5
1
1
Volume—Adjusts the volume of the Wireless Subwoofer.
2
Power Mode LED—Shines green when the Wireless Subwoofer
is on and red when it's in standby mode or off.
3
Wireless ID Switch—Selects the "channel"
for the Wireless Subwoofer signal.
4
Power Switch—Turns the Wireless Subwoofer on and
off, but you can leave it on all the time if you wish.
5
Low Pass—Adjusts the frequency range over
which the subwoofer operates.
6
Phase Switch—See page 5.
-6
AM PM EST
4
3
polkcs@polkaudio.com 3