Specifications; Customer Support; Before You Ask For Repair - Epson ELPS01 Manual De Instrucciones

Specifications

Model:
Playback frequency range:
Crossover frequency:
Max. output:
Input impedance:
Input sensitivity (at max. volume): 40 mV (Subwoofer)
Speaker:
Power supply:
Power consumption:
Operating temperature range:
Storage temperature range:
External dimensions (W x H x D): 124 x 170 x 224 (mm)
Weight:
Other:
* Ratings and external appearance are subject to change without notice in the interest
of product improvement.

Customer Support

If you are unclear about anything, first contact the service counter indicated in the
User's Guide supplied with the projector.
f Before you ask for repair
If you are experiencing trouble, read "Troubleshooting" in this User's Guide, and check
the connections and setup for any problems.
If this does not remedy the trouble, perform the following and then ask for repair.
Never repair the product yourself. This is very dangerous.
(1) Turn the product off.
(2) Unplug the plug on the power cable from the outlet, and disconnect the AC adapter
connection terminal from the product.
Powered Subwoofer
40 to 350 Hz
90 to 170 Hz (variable)
15 W (4 Ω)
10 kΩ or more (Subwoofer)
18 kΩ or more (LINE)
40 mV (at LINE L/R input)
80 mV (at LINE single channel input)
10 cm woofer x 1 pc
100 to 240 VAC (50/60 Hz)
17.5 W
41 to 95 degrees F (5 to 35
14 to 140 degrees F (-10 to 60
(no condensation)
2 kg
Magnetic-proof design
(MAGNETIC SHIELDING)
º
C) (no condensation)
º
C)
25