Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Programming a Playlist
When the CD is stopped, you can select up to 20 CD
tracks to play in any order that you choose.
1. Press the STOP key [17] to make sure that playback
has stopped.
2. Press the PROG key [16]. The LCD display [11] will
flash "01" and the PROG indicator will flash too.
3. Use the NEXT or BACK keys [14, 15] to choose a track
to enter into the playlist.
4. Press the PROG/REPEAT key [16] to save the track
into the playlist. The LCD screen [11] will show the
current playlist track number that was just saved,
and then flash the next playlist track number.
•
In the above example, the display will show
"01" (the current playlist number) and then
flash "02" (the next playlist number).
5. Repeat steps 3 and 4 until your playlist is complete,
then press the PROG/REPEAT key [16] to finish the
playlist.
6. Press the PLAY/PAUSE key [18]. Play will start from
the first track in the playlist.
Page 16
7. Press the STOP key [17] to stop the programmed
playlist, then press the STOP key once more to de-
lete the program and return to normal playback.
Using the Cassette
Player
Press FUNCTION key [19] until the letters "TAP" appear
on the LCD screen.
About the Cassette Keys
The cassette keys are located below the cassette com-
partment [20]. They are numbered 21 to 26 in the sec-
tion "At a Glance" and throughout this manual.
You can learn more about their functions in the section
"At a Glance."
Naxa Electronics
Publicidad
Tabla de contenido
