Installing The Backpack Plate - Milwaukee M18 2970-20 Manual Del Operador

4 PIPELINE INSPECTION REEL

4.3 Installing the Backpack Plate

The 120' PIPELINE INSPECTION REEL comes with a backpack mounting plate which
allows the reel to be carried as a backpack. This is useful for transporting the small reel to
and from the job site. This is extremely helpful for climbing stairs or ladders.
CAUTION - Use care when transporting this tool when the reel and backpack are
connected. Tipping may occur.
The rear of 120' Pipeline
Inspection with backpack
plate installed
1. Release lever
1. Lift the release lever to unlock the backpack
plate.
2. Pull the bottom of the backplate away from the reel and
downward in one motion.
2
3
1
Backpack plate side view
2. Top mounting plate
3. Bottom retaining hooks
Removing the backpack plate
57
4
Backpack plate rear view
4. Male mounting post