Anti-Scalp Rollers; Cleaning - Husqvarna Z 254 Manual Del Operador

MAINTENANCE

Anti-scalp Rollers

Anti-scalp rollers are correctly adjusted when
they are slightly off of the ground when the deck
is at the desired cutting height in the operating
position. Anti-scalp rollers keep the deck in the
proper position to help prevent scalping in most
terrain conditions.
The anti-scalp rollers can be set in four positions:
• Upper: 38 mm to 63 mm (1-1/2" to 2-1/2") grass
• Middle: 63 mm to 102 mm (2-1/2" to 4") grass
• Lower: 102 mm to 152 mm (4" to 6") grass.
The rollers must be approximately 6.3 mm (1/4")
from the ground.

Cleaning

CAUTION! Use protective glasses when
cleaning and washing.
Regular cleaning, especially under the mower
deck, will increase the machine's life-span. Clean
the machine directly after use (after it is cooled),
before the debris sticks.
Do not spray water on the top of the mower deck.
Use compressed air to clean the top side of the
mower deck. Do not use a high pressure washer
or steam cleaner. Avoid spraying engine and
electrical components with water.
Clean the underside of the deck with normal
water pressure. Attach the quick connect (from
the accessory packet) to any garden hose. After
mowing, snap the hose to the cleanout port and
turn on water supply.
Restart the mower and engage the blades to use
the spinning action to wash away debris. Make
sure the hose is away from the mower blades.
Do not rinse hot surfaces with cold water. Let unit
cool before washing.
Hardware
Check daily. Inspect the entire machine for loose
or missing hardware.
25