Appendix A - Fluke Networks MicroNetBlink Guia Del Usuario

• To test terminated coaxial cables, connect the
red test lead to the connector housing and the
black test lead to center pin, or connect the
red test lead to the connector housing and the
black test lead to the ground.

Appendix A

M N B
ICRO ET
• Dimensions: 4.53" x 2.49" x 1.03"
• Weight: 19g
• Power: 9V alkaline DC battery (not included)
• 1 ft. each of red and black alligator test lead for
voltage and continuity testing
• 1 ft 4-pin modular RJ11 cord and plug for
voltage and continuity testing
• 1 ft 8-pin modular RJ45 cord and plug for tone
tracing, includes NetBlink feature to cause a 10
Base T or 10/100 Base T hub light to blink once
every 4 seconds for easy identification in a busy
wiring closet
• 1 'F' connector for tone tracing
• 3- position switch for operation mode control
• 2-color LED display for line polarity, continuity,
and voltage tests
• Green LED indicates NetBlink active
• Red LED for low battery
M P
ICRO ROBE
• Dimensions: 8.00" x 1.3" x 1.50"
• Weight: 16g
• Power: 9V alkaline DC battery (not included)
LINK
115mm x 63mm x 26mm
203mm x 35mm x 38mm
ENGLISH - 9