Battery; High Voltage Protection - Fluke Networks MicroNetBlink Guia Del Usuario

Battery

M N B
ICRO ET
M P
ICRO ROBE
The low Battery LED will light up when a low
battery condition is detected.
Using the units with a low battery may effect the
test accuracy.
If the units are stored for more than one month,
the battery should be removed.

High Voltage Protection

Do not touch the tip of M
circuit contact or line.
Remember to adjust the volume rotary to reach
an ideal volume level.
Do not expose the units to extreme humidity or
direct sunlight.
Do not open the units or attempt to repair in case
of malfunction. Please send it back to your
distributor for repair or replacement.
M N B
ICRO ET
voltage conditions that arise from normal
telephony applications such as 48 VDC at less
than 80 ma or 24 VAC used to power many
keysets. Tests cannot be performed when hazard
conditions exist on the inputs.
MicroNetBlink
requires a 9 Volt Alkaline battery.
LINK
requires a 9 Volt Alkaline battery.
is designed to withstand input
LINK
/ MicroProbe
TM
P
ICRO ROBE
TM
to the active