Automatic Time Setting; Manual Time Setting - National Geographic 9070300 Manual De Instrucciones

8.
9.

10 Automatic time setting

After the power is restored, the unit automatically searches
for the radio signal. It takes about 3-8 minutes to complete
this process.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
If no radio signal is received, proceed as follows:
1.
2.

11 Manual time setting

1.
2.
3.
4.
5.
6.
36 / 64
Push the °C/°F button to set the desired temperature
format (setting °C or °F on screen display).
Replace the battery compartment cover.
Press the DOWN button for approx. 2 seconds to initi-
ate the reception of the radio signal again.
If no radio signal is still received, the time setting must
be made manually.
Press and hold SET button for approx. 2 seconds to
change to time setting mode.
Digits to be set are flashing.
Press UP or DOWN button to change the value.
Press SET button to confirm and continue to the next
setting.
Settings order: Year > Month > Day > Time zone >
12/24-hour mode > Hours > Minutes
Finally press the SET button to save the settings and
exit the setting mode.