Features; Assembly - RIDGID R1020 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Grinding Wheel Capacity ............................................. 7 in.
Spindle Thread ........................................ 5/8 in. x 11 UNC
No Load Speed .................................... 8,000 r/min. (RPM)
kNOW YOUR ANGLE GRINDER
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
AUTO-STOP CARBON BRUSHES
When the auto-stop carbon brushes wear down to a prede-
termined level, the angle grinder automatically switches off,
ruling out the possibility of damage to the armature.
LOCk-ON BUTTON
The lock-on button is convenient for continuous grinding for
extended periods of time.
ROTATING HANDLE
The handle can be rotated 90° to the left and right for ease
of use.

ASSEMBLY

UNPACkING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Input ................................120 V, AC only, 60 Hz, 15 Amps
Net Weight ................................................................. 8 lbs.
SIDE HANDLE
The side handle provided stabilizes your grinder and must
be used during all operations. In addition to maintaining safe
control during use, the side handle also provides convenient
ease of operation for the operator.
SPINDLE LOCk BUTTON
The spindle lock button secures the spindle so that only one
wrench is needed to change the grinding wheel.
SWITCH TRIGGER
The angle grinder has a conveniently located switch
trigger.
TOOLLESS GUARD
A toolless protective guard deflects sparks and metal chips
during use.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Angle Grinder
Guard
Clamp Nut
Disc Flange
Grinding Wheel
Side Handle
Wrench
Operator's Manual
9 - English