Aqua Medic spectrus LED Manual De Instrucciones página 22

Effects
1.) < Cloud/storm/moon light
Go back to the previous page.
2.) On/Off switch
Turn on/off effect.
3.) Start time
Tap to select start time.
4.) End time
Current modifiable time point.
5.) Effect Intensity
Tap to change effect intensity.
6.) Demo
Tap to get a quick preview.
7.) Save
Tap to save effect settings.
The settings for the moonlight effect correspond to the settings for the cloud or storm effect.
8. Troubleshooting
Not detecting light after setting up WiFi:
a.) Pull down the connect list to re-start.
b.) Make sure the WiFi indicator light is solid blue.
c.) Make sure the phone is connected to the correct light SSID and wireless router. If this does not work, repeat
the WiFi set up.
Can't find the light's WiFi name on your mobile signal list for direct connection:
a.) Make sure the light didn't connect to the local WiFi router.
b.) Make sure your mobile device isn't too far away from the light.
c.) Press the reset button for three seconds to restore factory settings.
App crashes during connection:
a.) Make sure you connect to the correct network.
b.) Pull down the connection menu to refresh.
One or more lights are missing from app list:
a.) Make sure your mobile is connected to the correct light WiFI SSID and wireless router.
b.) Pull down the connection menu to refresh.
c.) Make sure your mobile device isn't too far from the light.
Losing power:
a.) Make sure the light is connected to a power source.
b.) Make sure the light is connected to the correct light SSID and wireless router.
c.) Pull down the connect list to refresh.
22