Fabric, Thread And Needle Table; Straight Stitch Sewing - Texi Ballerina Manual De Operación

TEXI Ballerina manual operation
Helpful hint
Like shown on drawing, stitches on top side of fabric are good but bottom side tends
to have a bunch of thread, it usually means that the upper thread is not threaded
correctly (especially threading of the upper thread tension may not be correct).
CAUTION: The feed dog will feed the fabric automatically.
Do not pull or push fabric with hands. This could cause needle breakage or poor
quality stitches.

FABRIC, THREAD AND NEEDLE TABLE

Select size of thread and needle according to the fabric to be sewn.
Type of fabric
Light weight
Medium weight
Heavy weight
Stretch, double knit, tricot, spandex, jersey

STRAIGHT STITCH SEWING

STRAIGHT SEWING AND FASTENING OF SEAM
1. Position the fabric under the presser foot. Hold upper
and bobbin thread loosely
2. Lower the presser foot lever and press START/STOP
button to start sewing.
3. When you reach the end of seam, press
the reverse button to sew 3-4 stitches.
4. Release the reverse button, press START/
STOP button and sew forwards until you reach
the end of the seam.
5. Raise the presser foot and cut thread.
Thread size
Ctn. #120 - 150
Silk #120 - 150
Syn. #120 - 150
Ctn. #100 - 120
Silk #100 – 120
Syn. #100 - 120
Ctn. #50 - 80
Silk #50 - 80
Syn. #50 - 80
Ctn. #120 - 150
Silk #120 - 150
The size of stitch width is displayed on the LCD at the lower right side.
Left position 0.0 – 3.0
Middle position 3.5
Right position 4.0 – 7.0
137
Needle size
70 – 80
80 – 90
90 – 100
80 – 90