Overcasting - Overlocking; Using The Overcasting Foot - Texi Ballerina Manual De Operación

TEXI Ballerina manual operation
APPROPRIATE FOR WORDS
1. As sewing letters, please use the satin foot instead
of presser foot.
2. Please refer to pattern chart to input numbers for
selecting letters.
3. For example, to sew
Press ME button, select number: 131+132+133...
* As selected mistaken please press CL button.
(1) On LCD screen, it will show the upper or lower
letters what you have selected.
(2) On LCD screen, the number of patterns/letters
selected will be shown.
(3) On LCD screen, the number will be shown
the pattern ordering as sewing.

OVERCASTING - OVERLOCKING

USING THE OVERCASTING FOOT

Position the fabric against the guide plate of the overcasting foot that
the needle falls near the edge of the fabric.
A. Overcasting stitches (width 5.0 - 7.0) are used for preventing
raveling of fabrics.
B. Some stitches can sew overcasting and regular stitches
at the same time. Therefore, it is convenient for sewing easy to
ravel and stretch fabrics.
CAUTION: Overcasting foot should be used for sewing patterns 6, 15, 18, 20, 41 and do not change the
stitch width narrower than 5.0. It is possible that needle could hit the presser foot and break when sewing
other patterns and width.
138