Scanning Using the Control Panel
Scanning using the control panel al-
lows you to send scanned files via e-
mail (Scan to E-mail), to an FTP server
(Scan to FTP), or to the shared folder
of a computer on a network (Scan to
Folder).
Scanning using the control panel is
only available with network connec-
tion.
Basic Operation for Sending
Scanned Files
This section describes the basic oper-
ation for scanning using the control
panel. The scanned file is sent via E-
mail, to an FTP server, or a computer,
depending on the specified destina-
tion.
A
Press the {Scanner} key.
B
Place the original on the exposure
glass or in the ADF.
If necessary, configure advanced
scan settings.
C
Press the {Address book} key.
You can press the {U}{T} keys to
scroll the address book.
Scanning from a Computer
Scanning from a computer (TWAIN
scanning) allows you to operate the
machine from your computer and
scan originals into your computer di-
rectly.
TWAIN scanning is available with
both USB and network connections.
Scanning Using the Control Panel
D
Search for the desired destination
by entering the destination name
using the number keys, and then
press the {OK} key.
The screen changes to show the
names that match the characters
you enter.
E
Press the {B&W Start} key or the
{Color Start} key.
To scan in black and white, press
the {B&W Start} key.
To scan in color, press the {Color
Start} key.
Depending on the machine's set-
tings, you may be prompted to
place another original on the expo-
sure glass. In this case, proceed to
the next step.
F
If you have more originals to
scan, place the next original on
the exposure glass, and then press
{1}. Repeat this step until all orig-
inals are scanned.
G
When all originals have been
scanned, press {2} to start send-
ing the scanned file.
Reference
For complete information about
the scanner function, see User
Guide
.
Basic Operation for TWAIN
Scanning
TWAIN scanning is possible if your
computer is running a TWAIN-com-
patible application.
1
A-9