Installation - Klarstein 10032940 Manual De Instrucciones

INSTALLATION

• Nehmen Sie das Heizgerät aus dem Karton.
• Entfernen Sie das Verpackungsmaterial.
• Überprüfen Sie die Montageteile
Freestanding installation
• The panel convector heaters should be wall-mounted. Some items can be also
stand with feet.
• Mount feet on the baseboard in accordance with inllustration below.
a. Uninstall the bracket from the body,see the image1
b. Drill the holes at each sides on the wall,then insert the plastic expanded plugs
within. Fix the bracket in the wall with screw,see the image2
c. Fit the heater into suitable position ensuing that the holes align with bracket.see
image3
d. Tight the screw on the top of bracket to catch steady,see image4.
• Pay attention to the position of the convector with regard to other objects.
• It is forbidden to place item under the socket.
• The convector has got IP24 degree of protection
• If you place item in bathroom, avoid ingress of water on the surface.
EN
15