Publicidad
BIKE FORK MOUNTING-9mm
2. SEAT FORK
1. OPEN LEVER
BIKE FORK MOUNTING-15mm
2. SEAT FORK
1.
INSERT 15mm
SKEWER TUBE
3. INSERT AXLE
BIKE FORK MOUNTING-20mm
2. SEAT FORK
1. INSERT 20mm
SKEWER TUBE
3. INSERT AXLE
AXLE FROM BIKE
4. TIGHTEN AXLE
FOR SOME 20mm FORKS WITH
DOUBLE LEVERS, YOU WILL ONLY
BE ABLE TO OPEN LEVER ON
NOTCH SIDE PART WAY. ADJUST
AS NECESSARY.
4. TIGHTEN AXLE
AXLE FROM BIKE
BIKE CABLE LOCK
4. CLOSE LEVER
3. ADJUST KNOB TO ALLOW LEVER
TO FIRMLY CLAMP FORK
Fat tire skewer adaters are also available from Küat or your local dealer.
VISIT WWW.KUATRACKS.COM FOR VIDEO INSTRUCTION. CLICK ON INSTRUCTIONS TAB.
VISIT WWW.KUATRACKS.COM TO REGISTER YOUR TRIO. CLICK ON REGISTRATION TAB.
Step 1.
Pull lock housing from end cap to
release cable from magnetic stop.
Step 3.
Loop cable through rear tire and
rear triangle of bike frame. Insert
cable tip into lock housing to lock.
You do not need the supplied key to
lock but will need the key to unlock
.
Step 2.
Slide cable out from lock housing.
9mm x 135mm FAT BIKE SKEWER
Publicidad
