Manuales relacionados para Truper TPN-875
Resumen de contenidos para Truper TPN-875
- Página 1 Manual Air Angle Grinder 4 1/2” Disc diameter Applies for: Code Model 101072 TPN-875 TPN-875 Use oil continuously and WARNING dosed to lubricate the tool. Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Manual before using the tool. Parts Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference only. They might be different from the real tool. Maintenance Notes Authorized Service Centers Warranty Policy TPN-875 ENGLISH... -
Página 3: Technical Data
Technical Data TPN-875 Code 101072 Description Air angle grinder Disc Diameter 4 1/2” Spindle Diameter 3/8” Vibration Level < 1.6 m/s Noise Level 98 dB Free Speed 11000 RPM Weight 3.9 lb Air Consumption 4.6 CFM Hose Minimum 3/8” Recommended Diameter... - Página 4 General Safety Warnings for Pneumatic Tools Keep your work area clean, tidy and well lit. Wear adequate protective safety accessories. CAUTION CAUTION Cluttered and dark areas may cause accidents. Wear eye protection, dust mask, non-skid safety shoes, helmet and ear plugs. In normal conditions, the risk of Never use the tool in explosive areas or in the presence injury is reduced.
-
Página 5: Risk Control When Using Pneumatic Tools
Risk Control When Using Pneumatic Tools Risk of injury in head and eyes To prevent head and eyes injuries WARNING • Compressed air out of pneumatic • Always, when operating pneumatic equipment wear equipment may be dangerous. Objects like brackets, burrs, protection glasses in compliance with the AMSI Z887.1 splinters, dust and other residues may be impelled towards Standard. - Página 6 Risk Control When Using Pneumatic Tools Risk of injuries To prevent injuries WARNING • Damaged hoses may burst and cause • Do not abuse the hose or the connectors. serious injuries or deafness. • Keep the hose away from sharp or abrasive edges. •...
-
Página 7: Parts
Parts Regulating Screw Allen Key Inlet Handle Auxiliary Handle Mounting Hole Outlet Wrench Trigger Trigger Two Prong lock Wrench Auxiliary Handle Disc Guard (not included) Assembly Guard Assembly • Match the holes in the guard (A) with the holes in the grinder head (B). - Página 8 Assembly Cutting Disc Installation (Not Included) • Confirm that the wheel size is compatible with the grinder and spindle size. • Use only discs specified for grinding wheel r/min or larger. WARNING • Disconnect the grinder from the air supply before inserting or removing the cut-off wheel. •...
-
Página 9: Start Up
Start Up Turning ON • Turn on the air compressor and allow it to fill. • Regulate the air compressor output pressure from 517 kPa to 758 kPa (75 PSI to 110 PSI). WARNING The tool operates at this pressure range; operating at higher pressure ranges will result in shorter tool life. -
Página 10: Notes
Notes ENGLISH... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.